Product Introduction
YLH Metallurgical Electric Hoist Bridge Crane is designed in accordance with the provisions of JB/T3695-94 "Electric Hoist Bridge Crane" Quality Inspection Office (2007) 375 "Notice on Opinions on the Rectification of Metallurgical Lifting Machinery" and TSG00002-2008 "Lifting Machinery Safety Technical Supervision Regulations Bridge Crane", and is improved on the basis of LH Electric Hoist Bridge Crane. The whole machine has the characteristics of reasonable structure, strong rigidity and light weight. The whole machine is used in conjunction with HYJI Sichuan Metallurgical Electric Hoist. It is a bridge-type lifting machinery with a lifting capacity of 3-10t, a span of 7.5-31.5m, and a working level of A5.
This product is widely used in lifting molten metal. This product has three operation modes: ground, remote control and operation room. There must be a safe passage for ground operation. The operating room has two types: open and closed. It can be divided into two types of left or stone surface installation according to actual conditions. There are two entry directions: side and end: the above situations are to meet the different needs of users.
YLH metallurgical electric hoist bridge crane manufacturer and provide design and manufacturing, installation and commissioning, major modification, repair and maintenance, annual inspection and maintenance services in terms of non-standard lifting weight, lifting height, lifting/operating speed, and change of control mode.
